CyberPower SE450G1 UPS
CyberPower SE450G1 UPS System
The CyberPower SE450G1 uninterruptible power supply (UPS) system provides surge protection for lightning-induced surges and other power events that can damage electronic equipment. This unit delivers enough battery backup to connected electronics during a utility power failure, so you can perform a proper shutdown to protect against the loss of data and damage to valuable electronics including computers, gaming consoles, and broadband routers. Including a sleek new design, this UPS is perfect for all your home office and entertainment needs.
A transformer converts alternating current line voltage to a higher value or a lower value. Transformers rely upon electromagnetic induction, the process which occurs when the alternating current within a circuit generates current in a nearby circuit.
Transformers vary in design and size, as well as using different amounts of current. Small transformers plug into a wall outlet and create low direct current voltages which are used by common electronic devices. Transformer outlets are more widely spaced than other outlets to accommodate transformer block adapters or other adapters that are large in size. Transformer outlets can be used to connect any appropriate device to a surge protector.
CYBERPOWER SE450G1 UPS FEATURES AND BENEFITS
- Battery Backup - Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.
- Surge Protection - Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.
- Simulated Sine Wave Output -Uses pulse wave modulation to generate a stepped, approximated sine wave to supply cost-effective battery backup power for equipment that does not require sine wave output.
- GreenPower™ High-Efficiency Design - Reduces power consumption by utilizing a compact charger and power inverter to create an ultra-efficient backup power system for home and office use.
- Transformer-Spaced Outlets - Accommodates large transformer-based plugs without compromising the access of other outlets.
- Warranty - 3 years from purchase date
- Battery Size - 12V / 2.9Ah
- Battery Type: Sealed Lead-Acid
- Hot Swappable: No
- Runtime at Full Load: 1.5 min
- Runtime at Half Load: 6 min
- Typical Recharge Time: 8 hours
Input
- Circuit Breaker: 7A
- Cord Length: 5ft (1.5m)
- Input Frequency Range: 47Hz - 63Hz
- Input Plug Type: NEMA 5-15P
- Input Voltage: 120VAC
- Nominal Input Voltage: 120VAC
Output
- On AC WaveForm: Sine Wave
- On Battery Frequency: 50/60Hz ± 1%
- On Battery Voltage: 120VAC ± 5%
- On Battery Waveform: Simulated Sine Wave
- Outlet Type: 8 - NEMA 5-15R
- Outlets - Battery & Surge Protected: 4
- Outlets - Surge-Only Protected: 4
- Outlets - Total: 8
- Outlets - Widely Spaced: 2
- Output Power Factor: 0.6
- Overload Protection: Circuit Breaker Protected
- Typical Transfer Time: 8ms
- USB Charge Port: No
- VA: 450 VA
- Watts: 260W
CYBERPOWER SE450G1 UPS SAFETY
- RoHs Compliant
- UL1778
- cUL
- FCC DOC Class B
- Energy Star (USA)
- CEC
- Audible Alarms - battery mode, low battery, overload, fault
- Operating Elevation: 0 - 10,000 ft (0 - 3048 m)
- Operating Relative Humidity: 0 - 95% (non-condensing)
- Operating Temperature: 32 - 104ºF (0 - 40ºC)
- Storage Elevation: 0 - 50,000 ft (0 - 15239 m)
- Storage Relative Humidity: 0 - 05% (non-condensing)
- Storage Temperature: 5 - 113ºF (-15 - 45ºC)
Power Storage Solutions Engineering Services for CYBERPOWER SE450G1 UPS
Our engineering team can help you quickly calculate many values essential for the proper selection of standby battery products. We provide expert sizing analysis you need to properly size and select the proper battery. Let our Battery Sizing Specialist ensure you select the correct product for your telecommunications applications.
This includes the ability to: Select batteries based on complex step loads and generate IEEE-485 Sizing Work Sheets. Select batteries based on constant current loads. Select batteries based on constant power loads. View and customize rating tables. Perform battery run time analysis.
Power Storage Solutions Installation and Service for CYBERPOWER SE450G1 UPS
We understand that data centers are heavily reliant on batteries for backup power. We also understand that batteries must be redundant and if only one battery in your UPS configuration is not performing; it compromises your overall backup power. Our experience and our focus is to know the batteries and their implication for your operation. To determine the perfect solution, we will partner with you, analyze your critical power needs and construct the backup power solution that will perform as designed.
We can remove and recycle your old battery system then install, properly set up and test your new system. We have been installing stationary batteries for over 20 years. We have the experience, equipment and capabilities to safely perform this type of work.
Routine maintenance ensures your UPS equipment stays reliable, improving your UPS’s overall performance and extending their useful life. Service plans allow customers to be proactive; providing opportunity to detect potential points of failure preventing expensive problems.
When ordering new batteries, also remember to properly recycle your old lead batteries. Federal and state regulations require lead-acid batteries be recycled. Power Storage Solutions’ nationwide service organization can arrange pickup, transportation to and recycling at any one of our company affiliated smelters. Click Here for More Information
For More Information, please visit the CyberPower Website: CYBERPOWER SE450G1 UPS
Additional Information
| Weight | 132 lbs |
|---|---|
| Brand | Enersys |
| Battery Model | SBS PowerSafe |
| Equipment | Batteries |
| Market | Switchgear, UPS-Data Centers |
| Length | 22.1 |
| Width | 4.90 |
| Height |
