EnerSys NP1.2-6 GENESIS® NP BATTERIES

The NP1.2-6 Genesis^® batteries feature heavy duty thick lead calcium grids for years of dependable performance.The NP1.2-6 Genesis^® batteries have a high energy density design, factory sealed case and leak proof construction ensures that these rechargeable sealed lead acid batteries are extremely reliable and virtually maintenance-free. Genesis NP battery design includes a low pressure relief valve to release any build-up of pressure within the case. This vent is completely self-resealing ensuring the highest possible rate of internal recombination is reached within each battery. With an expected life span of three to five years in float applications at 77°F (25°C) ambient temperature, more than 1,000 discharge/recharge cycles can be realized depending on the DoD for each cycle. The internal grid design has been over 10 decades of battery experience to yield a battery that can recover even after repeated deep discharges.

NP1.2-6 GENESIS® FEATURES AND BENEFITS

• Capacity Range 1-200Ah
• Lead calcium alloy
• Sealed design, no watering required
• 1,000+ cycles can be realized depending on Depth of Discharge (DoD)
• Heavy duty grids maximize life
• Three to five year life expectancy in float applications at 77°F (25°C) ambient temperature

NP1.2-6 GENESIS® APPLICATIONS

• 5G & Small Cells
• Industrial UPS
• Alarm & Security Systems
• Emergency Lighting
• Public Safety Networks
• Security & Surveillance
• Traffic & Intelligent Transportation Systems (ITS)

NP1.2-6 GENESIS® CONSTRUCTION

• Heavy duty thick lead-calcium grids
• Sealed case for leak-proof operation
• Designed to promote internal recombination for longer life
• Integral pressure relief valve operates at 2-3 PSI and is self-resealing
• Flame retardant UL-94-V0 case and cover available

NP1.2-6 GENESIS® INSTALLATION & OPERATION

• Space efficient footprint
• Compact, quick and simple installation process
• Three to five year life expectancy in float applications at 77°F (25°C) ambient temperature
• Low maintenance - no watering required
• Operating temperature: -5°F (-15°C) to 122°F (50°C); Recommended temperature: 68°F (20°C) to 86°F (30°C)

NP1.2-6 GENESIS® STANDARDS

• Approved for air transportation (IATA A67)
• Recognized by UL File no. MH16464 and MH15740
• Non-spillable classification (UN2800)
• IEC 61056-1, IEC 60896-21 and IEC60896-22 compliant

Power Storage Solutions Installation and Service for NP1.2-6 

We understand that data centers are heavily reliant on batteries for backup power. We also understand that batteries must be redundant and if only one battery in your UPS configuration is not performing; it compromises your overall backup power. Our experience and our focus is to know the batteries and their implication for your operation. We will partner with you, analyze your critical power needs and construct the backup power solution that will perform as designed

We can remove and recycle your old battery system then install, properly set up and test your new system. We have been installing stationary batteries for over 20 years. We have the experience, equipment and capabilities to safely perform this type of work

Routine maintenance ensures your UPS equipment stays reliable, improving your UPS’s overall performance and extending their useful life. Service plans allow customers to be proactive; providing opportunity to detect potential points of failure preventing expensive problems.

When ordering new batteries, also remember to properly recycle your old lead batteries. Federal and state regulations require lead-acid batteries be recycled. Power Storage Solutions’ nationwide service organization can arrange pickup, transportation to and recycling at any one of our company affiliated smelters. Click Here for More Information

For More Information from EnerSys Website: EnerSys Genesis NP